Faux Glitter Santa DTF Transfer

This is a Pre-Order Item.

✨ Mockup Information : Heliconia 

✨ Size: 11.5

✨ Ink Color: Full 

Our screens can be applied too many fabric types including 100% Cotton, Poly/ Cotton Blends and more.  

Helpful Hints and Pressing Instructions: 

Every Heat Press will vary from the heating element placements within the platen, how many heating elements it has. Digital Read Out on your machine can vary up to a 30 Degree Difference because of this We suggest purchasing a heat temp gun to check for the accuracy of your plate before pressing. 

This item is a DTF Transfer: 

• Preheat your press 310 Degrees
• Set your pressure to Medium or 5-7 PSI
• Once your platen heats up to 310 degrees prepress your item for 7-10 seconds to remove wrinkles and moisture. 
• Place your transfer face down where the design is touching the fibers of the fabric
• Make sure your item is centered and in the location you desire then tape into place to ensure no shifting or moving of the transfer.
• Lower your clamp and press for 15 seconds
• After time has been reached raise the press platen and peel the transfer while still hot. 
• Place parchment paper for a matte look or Teflon for a regular finish over the design and repress for 15 seconds